Hi, I'm a little doubt, I have a sg200-10fp poe 8 ports, 2 ports are SFP that and the fiber connection, (obviously with a separate connector), the function of these ports and connect 2 switches without having problems of latency long distance, my question is:
If your ISP (Internet service provider) takes you to the FTTH Fiber home and you can use these ports or need a modem that supports VDSL2 + and that manages communications?
That really depends on your ISP. My ISP uses long haul fiber I had to get a special SFP from them. The SG200 doesn't have NAT capability so not sure what you are trying to do with it but if the idea is to have everything share the internet while plugged in that may not work.
Background : There is growing interest for SDWAN capability on NFVIS based virtual branch. SDWAN XE code enables SDWAN with key features that are part of IOS XE codebase, including WAN diversity option with T1/E1, LTE, etc.
This Howto document ...
i have a case here, i have two vlans, one is vlan 10, 192.168.10.0/24. another is vlan 100, 192.168.100.0/24.
i design to block vlan 10 to talk to vlan 100 but allow vlan 100 to reach vlan 10.
how can i achieve this?
i tried access list, but didn't work.
I upgraded the NX -OS on Nexus 7K and after upgrade. I could not longer console in. What could be the root cause?
Check the line console config and the speed is not set to 9600 after upgrade per below
line Console: Spe...
Howto Install A Custom Linux VM on NFVIS / ENCS
This Howto is a step-by-step guide to install a custom Linux VM on Cisco Enterprise NFV Infrastructure Software (NFVIS) running on the Cisco Enterprise Network Compute System (ENCS). This guide u...
Anyone who has ever poured over enormous amounts of data from syslogs, Wireshark, and debug dumps from individual devices can relate to this very well. There’s got to be a better way to identify trouble spots in the network. With the network playing an in...