12-12-2022 03:15 AM
Hi all
I have this VOIP device and when i start it the device pulls the wrong VLAN, it pulls DATA VLAN instead of Voice VLAN.
note that switchport is configured as Voice.
please i need help on this one
thank you in advance.
12-12-2022 04:04 AM
What kind of VOIP device is that ? if its Cisco make sure CDP is enabled in the switch , if its other than Cisco make sure LLDP is enabled
12-12-2022 08:03 AM
How is the port actually configured?
What's (precisely) the VoIP device?
12-26-2022 09:41 PM
here is an example of configuration
switchport access vlan 10
switchport mode access
switchport voice vlan 101
spanning-tree portfast
spanning-tree bpduguard enable
and the device is cisco
12-27-2022 12:23 AM
Thanks for giving us the example of configuration. Can you be more specific about the device? Knowing that it is Cisco is a good start. Knowing exactly what type of Cisco device it is wound be helpful.
12-28-2022 08:35 PM - edited 12-28-2022 08:35 PM
we have 3 types of devices
7941
7861
7841
12-27-2022 12:32 AM
Hello,
post the output of:
sh vlan
sh vtp status
of the device where this port is configured on.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide