cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
854
Views
0
Helpful
7
Replies

cisco WS-C4510R-E

Hello,

 

Hi have a cliente with a Cisco Catalyst 4500 L3 (cisco WS-C4510R-E), it has dual 10gb ports per module, but i can only activate one 10gb port per module, it says its inactive (Te5/2 and Te6/2):

 

switch#show int status mod 5

Port Name Status Vlan Duplex Speed Type
Te5/1 ------------ connected trunk full 10G 10GBase-SR
Te5/2 ------------ inactive 1 full 10G 10GBase-ER
Gi5/3 ------------ inactive 1 full 1000 No Gbic
Gi5/4 ------------ inactive 1 full 1000 No Gbic
Gi5/5 inactive routed full 1000 No Gbic
Gi5/6 inactive routed full 1000 No Gbic

switch#show int status mod 6

Port Name Status Vlan Duplex Speed Type
Te6/1 ------------ connected trunk full 10G 10GBase-SR
Te6/2 ------------ inactive 1 full 10G 10GBase-ER
Gi6/3 ------------ inactive 1 full 1000 No Gbic
Gi6/4 ------------ inactive 1 full 1000 No Gbic
Gi6/5 inactive routed full 1000 No Gbic
Gi6/6 inactive routed full 1000 No Gbic

 

I have tried to do the commands:

 

switch(config)#hw-module module 5 port-group 2 select tengigabitethernet

switch(config)#hw-module module 6 port-group 2 select tengigabitethernet

 

Still appears has inactive.

 

Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 12.2(50)SG2, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 27-Apr-09 18:36 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x126636CC

ROM: 12.2(44r)SG5
Darkside Revision 4, Jawa Revision 20, Tatooine Revision 140, Forerunner Revision 1.74

sw01-core-lis-sc uptime is 10 weeks, 6 days, 19 hours, 32 minutes
Uptime for this control processor is 10 weeks, 6 days, 19 hours, 19 minutes
System returned to ROM by power-on
System restarted at 19:28:40 UTC Tue May 25 2021
System image file is "bootflash:cat4500e-entservicesk9-mz.122-50.SG2.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C4510R-E (MPC8548) processor (revision 6) with 524288K bytes of memory.
Processor board ID SPE134400RD
MPC8548 CPU at 1.33GHz, Supervisor 6-E
Last reset from PowerUp
10 Virtual Ethernet interfaces
164 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.

Configuration register is 0x2101

 

Anyone knows how to activate that ports?

 

Thanks in advance.

 

 

7 REPLIES 7
pieterh
VIP Collaborator

you possibly refer tot the interfaces on the supervisor module ?

post output from show inventory
only the last column reports switching capacity over 10Gbps,
the other supervisor models do not have the switching capacity for 2x 10G 

 

able 1. Cisco Catalyst 4500 Enhanced Layer 3 Supervisor Engine Performance and Scalability Features

 

Feature and Description

Cisco Catalyst 4000/4500 Supervisor Engine IV

Cisco Catalyst 4000/4500 Supervisor Engine V

Supervisor Engine V-10GE

Cisco Catalyst 4500 Series Supervisor Engine 6-E

Total Centralized Switching Capacity

64 Gbps

96 Gbps

102 mpps and 136 Gbps

320 Gbps

Per Slot Switching Capacity

6 Gbps

6 Gbps

6 Gbps

24 Gbps

sw01-core-lis-sc#show inventory
NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4510R-E 10 slot switch "
PID: WS-C4510R-E , VID: V01 , SN: SPE134400RD

NAME: "Clock Module", DESCR: "Clock Module"
PID: WS-X4K-CLOCK-E , VID: V01 , SN: JAE1345NCNJ

NAME: "Mux Buffer 1 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-E , VID: V01 , SN: JAE1334HI8E

NAME: "Mux Buffer 2 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-E , VID: V01 , SN: JAE1334HD2C

NAME: "Mux Buffer 3 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-E , VID: V01 , SN: JAE1334HH5B

NAME: "Mux Buffer 4 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-E , VID: V01 , SN: JAE1334HD7L

NAME: "Mux Buffer 7 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-E , VID: V01 , SN: JAE1334HDB5

NAME: "Mux Buffer 8 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-E , VID: V01 , SN: JAE1334HD2M

NAME: "Mux Buffer 9 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-E , VID: V01 , SN: JAE1334HDCM

NAME: "Mux Buffer 10 ", DESCR: "Mux Buffers for Redundancy Logic"
PID: WS-X4590-E , VID: V01 , SN: JAE1334HD7K

NAME: "Linecard(slot 1)", DESCR: "6 Dual media SFP or 10/100/1000BaseT (RJ45)V voice power ports (Cisco/IEEE)"
PID: WS-X4506-GB-T , VID: V06 , SN: JAE1334H2BD

NAME: "GigabitEthernet1/1", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS1346000G

NAME: "GigabitEthernet1/2", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS1346000Z

NAME: "GigabitEthernet1/3", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS13460007

NAME: "GigabitEthernet1/4", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS1346000B

NAME: "GigabitEthernet1/5", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS1346000R

NAME: "GigabitEthernet1/6", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS1346000V

NAME: "Linecard(slot 2)", DESCR: "6 Dual media SFP or 10/100/1000BaseT (RJ45)V voice power ports (Cisco/IEEE)"
PID: WS-X4506-GB-T , VID: V06 , SN: JAE1343M8MI

NAME: "GigabitEthernet2/1", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS1346000S

NAME: "GigabitEthernet2/2", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS1346000L

NAME: "GigabitEthernet2/3", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS1346000M

NAME: "GigabitEthernet2/4", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS1346000W

NAME: "GigabitEthernet2/5", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS1346000Y

NAME: "GigabitEthernet2/6", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN: FNS13460010

NAME: "Linecard(slot 3)", DESCR: "10/100/1000BaseT (RJ45)V E Series with 48 10/100/1000 baseT PoE ports (Cisco/IE"
PID: WS-X4648-RJ45V-E , VID: V03 , SN: JAE1347OAJR

NAME: "Linecard(slot 4)", DESCR: "10/100/1000BaseT (RJ45)V E Series with 48 10/100/1000 baseT PoE ports (Cisco/IE"
PID: WS-X4648-RJ45V-E , VID: V03 , SN: JAE1347OA56

NAME: "Linecard(slot 5)", DESCR: "Supervisor 6-E 10GE (X2), 1000BaseX (SFP) with 2 10GE X2 ports"
PID: WS-X45-SUP6-E , VID: V05 , SN: JAE1342L94B

NAME: "TenGigabitEthernet5/1", DESCR: "10Gbase-SR"
PID: X2-10GB-SR , VID: V03 , SN: ONT121801X5

NAME: "TenGigabitEthernet5/2", DESCR: "10Gbase-ER"
PID: X2-10GB-ER , VID: V04 , SN: OPB15140077

NAME: "Linecard(slot 6)", DESCR: "Supervisor 6-E 10GE (X2), 1000BaseX (SFP) with 2 10GE X2 ports"
PID: WS-X45-SUP6-E , VID: V05 , SN: JAE1345NPIC

NAME: "TenGigabitEthernet6/1", DESCR: "10Gbase-SR"
PID: X2-10GB-SR , VID: V03 , SN: ONT121801TF

NAME: "TenGigabitEthernet6/2", DESCR: "10Gbase-ER"
PID: X2-10GB-ER , VID: V04 , SN: OPB15220445

NAME: "Linecard(slot 7)", DESCR: "10/100/1000BaseT (RJ45)V E Series with 48 10/100/1000 baseT PoE ports (Cisco/IE"
PID: WS-X4648-RJ45V-E , VID: V04 , SN: JAE14490QXA

NAME: "Fan", DESCR: "FanTray"
PID: WS-X4582-E , VID: V02 , SN: SPE134400HR

NAME: "Power Supply 1", DESCR: "Power Supply ( AC 2800W )"
PID: PWR-C45-2800ACV , VID: V05 , SN: SNI1345A357

NAME: "Power Supply 2", DESCR: "Power Supply ( AC 2800W )"
PID: PWR-C45-2800ACV , VID: V05 , SN: SNI1345A35K

And thanks

balaji.bandi
VIP Master

what supervisor ?

 

Look at the below thread - do you think you have same setup :

 

https://community.cisco.com/t5/switching/4507r-e-ports-inactive/td-p/1758729

 

BB

***** Rate All Helpful Responses *****

How to Ask The Community for Help

Joseph W. Doherty
Hall of Fame Expert

I don't recall the particulars for your sup6-E, but I do recall (?), on many of the 4500 sups, when running with dual sups you cannot use all of both sups' uplink ports.  (I also recall [??], perhaps one of a 4500's sups offered a configuration option to activate all uplink ports on both sups.)

Reza Sharifi
Hall of Fame Expert

Hi,

Configuration register is 0x2101

Why is the config register 0x2101? It should be 0x2102.

Also, are the sups configure in SSO mode? Can you post the output of "show redundancy"?

HTH

Leo Laohoo
VIP Community Legend

Wow.  That is a very old IOS.