cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
1599
Views
0
Helpful
6
Replies
Hamood Rehman
Beginner

Cisco1921 Initial Login

     How do I set a password? new Cisco 2911 router,       

C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4,

yourname>enable
% No password set
yourname>configure terminal
            ^
% Invalid input detected at '^' marker.

yourname>usenam
yourname>usenam?
% Unrecognized command
yourname>passw
yourname>passw?
% Unrecognized command
yourname>secre
yourname>secre?
% Unrecognized command
yourname> 

Thanks  

1 ACCEPTED SOLUTION

Accepted Solutions

Did you plug console cable into aux port instead into Console port (blue)?

View solution in original post

6 REPLIES 6
mahmoodmkl
Rising star

Hi

can u try with cisco as username and password

yourname>cisco

Translating "cisco"...domain server (255.255.255.255)yourname>cisco
Translating "cisco"...domain server (255.255.255.255)

Hi

first type enable then when prompted for password enter cisco

Did you plug console cable into aux port instead into Console port (blue)?

View solution in original post

yourname>enable

% No password set

Yes I did, should have taken smoke break an hour ago....

yourname#

yourname#

yourname#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

yourname(config)#usern

yourname(config)#username yourname#
yourname#
yourname#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
yourname(config)#usern
yourname(config)#username