Cisco2951 and Cisco2921 in HSRP?

[jacinto1m]

Hi,

Is it possible to configure a Cisco2951 and a Cisco2921 in HSRP?

Thanks in advance!

[acampbell]

Juan,

Yes this possible.

As long as the LAN interfaces are in the same subnet or  & VLAN

Look at this link for HSRP configuration

http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_hsrp.pdf

Regards,
Alex.
Please rate useful posts.

[Vignesh Srinivasan]

Hey Alex,

I  know this is an old post but I ran into it and...

This is possible only if there's  a L2 device connected in between the  two devices.

HSRP needs some form of L2 connectivity between  the devices failing which it will not work and it is not possible to interconnect two Cisco 2921's  or 2951's for that matter with the device ports. You will have to buy a intermediate L2 Switch..

Cheers,

Vignesh