cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
227
Views
0
Helpful
2
Replies
pjdouglas42
Beginner

Class-Map Cisco 3850

Hi

 

I'm setting up a policy map on a Cisco 3850 switch. But having trouble matching an interface.

 

On the 3750 model you could match traffic on an input interface:

 Class-map match-all Example

 match input-interface G1/0/10 - G1/0/11

 

I wish to setup similar on a 3850, only Cisco appear to have remove this feature as the input-interface command is not available.

 

Does anyone know the syntax or a way to match an interface using class-map for use with a policy map and policing traffic ?

 

Thanks

 

2 REPLIES 2
Georg Pauwen
VIP Expert

Hello,

 

I think the closest you can get is 'match vlan', assuming that all ports are part of the same Vlan.

Thanks Georg,

 

The interfaces in question are trunks; so I would need to match against several vlans.

 

Is there any reason why cisco removed this command ? There does not seem any rationale behind it, it was a useful command to have.....

 

Thanks

 

Paul