CLI Output filter - show int counters errors

[ju.mahieu]

Hi,

On catalyst and Nexus, I would like to filter the lines with 0 0 0 0 0 from the "show int counters errors" result.

Result without filter :

Switch#sh int counters errors

Port        Align-Err    FCS-Err   Xmit-Err    Rcv-Err UnderSize OutDiscards
Gi1/1               0          0          0          0         0           0
Gi1/2               0          0          0          0         0           0
Gi1/3               0          0          0          0         0           0
Gi1/4               0          0          0          0         0           0
Gi1/5               0          0          0          0         0           0
Gi1/6               0          0          0          0         5500     0
Gi1/7               0          0          0          0         0           0
Gi1/8               0          0          0          0         0           6005

My expected result

Switch#sh int counters errors | exclude or grep ???

Port        Align-Err    FCS-Err   Xmit-Err    Rcv-Err UnderSize OutDiscards
Gi1/6               0          0          0          0         5500     0
Gi1/8               0          0          0          0         0           6005

Thank you for your help.

Regards.

Ju

[OMAR CANDARAVE]

Please try with:

sh int counters errors | ex "0 \+0 \+0 \+0 \+0 \+0"

In Nexus switch and let me know.

[ju.mahieu]

Hello Omar,

It works great on my nexus. Thank you.

But not on my catalyst 6k. Argh

Regards,

[Cisco Freak]

Try this.

sh int counter | ex 0          0          0          0         0           0

:)

CF

[Cisco Freak]

This should also work.

sh int counters | ex 0(.*)0(.*)0(.*)0(.*)0(.*)0

CF

[ju.mahieu]

This one almost works :-)  but it filters also the lines with Gi0/2 ....

Ju

[Cisco Freak]

I assume any interface that is being left out,  interface counter value is ending at 0 for that interface. eg:12340

[ju.mahieu]

These kind of lines are filtered:

sh int counters errors | ex 0(.*)0(.*)0(.*)0(.*)0(.*)0

Gi1/0/12            0           0           0           0          0           83

Gi2/0/20            0           0           0           0          0      5343759
Gi2/0/21            0           0           0           0          0      5343135
Gi2/0/22            0           0           0           0          0      5344382

Po2                 0           0           0           0          0          104

Thank you for your help.

Ju

[ju.mahieu]

thank you but it doesn't work.

Ju

[peter.grafton]

sh int counter | ex                      0             0             0             0

[uday singh]

This should do it:

sh int counter erro | in ^(.+ )[123456789]|Port

NOTE:  there is a white space after the '+' sign.