cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
254
Views
0
Helpful
0
Replies
Highlighted
Beginner

Compact Flash Issue Nexus 7018

(Nexus 7018)

When removeing a compact flash card from the standby supervisor located in module 10  it will not come back online when you reinsert the card.

For workaround.

To bring slot0: back online you need to perform the following steps:

1. execute a system switchover from the active supervisor (module 9) making the standby supervisor the active supervisor (module 10)

This results in no change in the online status of slot0: in module 10 (currently active)

2. From the active sup (module 10) execute a system switchover once the system switchtover is completed slot0: recovers and is back online.

We have populated 8G in the log flash reader slot & 2G in slot0: on both module 9 (active sup) and module 10 (standby sup)

Is this is expected behaviour ? any document ? should we always do this workaround to bring the Sup back online ?

Thanks,

AK

CreatePlease to create content
Content for Community-Ad