05-03-2012 11:55 AM - edited 03-07-2019 06:29 AM
hi for conexion vss two 6506 which is the conector or speed (10g or1g) Sfp or x2
What is the connection that allows vss
Sent from Cisco Technical Support iPad App
05-03-2012 12:03 PM
Hi,
First of all you will need Sup720-10G. Futhermore the VSL link is treated as a systems control link and encapsulates all traffic into a special system header called the Virtual Switch Header (VSH). This encapsulation is done via dedicated hardware resources and the VSL can only be configured on a 10-Gigabit interface with following hardware ports:
•Sup720-10G, 10-Gbps ports
•WS-X6708
•WS-X6716 (in performance mode only, requires 12.2(33)SXI)
All having 10Gbps and X2 modules
Dan
05-03-2012 12:09 PM
Supervisor 2T is also support VSS, as far as newest line cards.
05-03-2012 12:06 PM
Only 10G EtherChannel. You may use Supervisor ports or line card's ports (X2 or XENPAK) with some restrictions.
05-03-2012 01:54 PM
Tks had no found that specification
Sent from Cisco Technical Support iPad App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: