Hi Al,
I am having an issue with a Cisco 3850 Catalyst switch, issue as below:
- Current config register is 0x142 and have configured the config register to 0x102 but even after reload the new config register does not come in place.
- Have reloaded the switch 2x but with no luck. Changed the config register on the primary and secondary switch yet no luck. It is running SSO.
Show version:
sh ver
Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.03.02SE RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 20-Feb-14 21:17 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.
(http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 1.2, RELEASE SOFTWARE (P)
XXXX uptime is 1 day, 13 hours, 53 minutes
Uptime for this control processor is 1 day, 13 hours, 56 minutes
System returned to ROM by reload at 23:44:31 ADST Wed Feb 26 2014
System restarted at 23:50:23 ADST Wed Feb 26 2014
System image file is "flash:packages.conf"
Last reload reason: Reload command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: Lanbase
License Type: Permanent
Next reload license Level: Lanbase
9 Virtual Ethernet interfaces
56 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
250456K bytes of Crash Files at crashinfo:.
250456K bytes of Crash Files at crashinfo-2:.
1609272K bytes of Flash at flash:.
1609272K bytes of Flash at flash-2:.
0K bytes of Dummy USB Flash at usbflash0:.
0K bytes of Dummy USB Flash at usbflash0-2:.
0K bytes of at webui:.
Base Ethernet MAC Address :
Motherboard Assembly Number :
Motherboard Serial Number :
Model Revision Number :
Motherboard Revision Number :
Model Number :
System Serial Number :
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 32 WS-C3850-24T 03.03.02SE cat3k_caa-universalk9 INSTALL
2 32 WS-C3850-24T 03.03.02SE cat3k_caa-universalk9 INSTALL
Switch 02
---------
Switch uptime : 1 day, 13 hours, 56 minutes
Base Ethernet MAC Address :
Motherboard Assembly Number :
Motherboard Serial Number :
Model Revision Number :
Motherboard Revision Number :
Model Number : WS-C3850-24T
System Serial Number :
Configuration register is 0x142 (will be 0x102 at next reload)
