cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
353
Views
0
Helpful
3
Replies

configuring 2232 (dual homed) from two 5K's

anthonypacheco
Beginner
Beginner

I have a 2232 dual homed to 2 5548's via a port-channel/vpc

I have one 5548A and configure the port for the 2232 with a vlan, plug into that port and it doesnt come up (inactive). I go to 5548b (Primary) and configure the port and it comes up. Is this considered normal?

1 Accepted Solution

Accepted Solutions

Reza Sharifi
Hall of Fame Expert Hall of Fame Expert
Hall of Fame Expert

Yes, that is a normal behaivor.  The uplink ports on the FEX will not come up until you configure the 5Ks.

HTH

View solution in original post

3 Replies 3

Reza Sharifi
Hall of Fame Expert Hall of Fame Expert
Hall of Fame Expert

Yes, that is a normal behaivor.  The uplink ports on the FEX will not come up until you configure the 5Ks.

HTH

cool just wanted to make sure. im a little hesistant to give that config sync a try. some things ive read these words keep standing out about, hokey, flakey