01-10-2013 09:39 AM - edited 03-07-2019 11:01 AM
I have 2 unit of WS-2950T. Each switch Giga1 I configured trunk mode.
Connect using straight cable --> no light
Connect using crossover --> got light. Connected. Ping other sw OK!
Do really need to use cross? i thought cisco sw auto detect?
Solved! Go to Solution.
01-10-2013 09:53 AM
Hi Mohd. It's an old switch now and doesn't feature Auto MDIX - i.e. Yes, you do need a crossover cable.
01-10-2013 09:53 AM
hi,
2950 switches do not support autoMDIX so you need a crossover.
Regards.
Alain
Don't forget to rate helpful posts.
01-10-2013 09:53 AM
Hi Mohd. It's an old switch now and doesn't feature Auto MDIX - i.e. Yes, you do need a crossover cable.
01-10-2013 09:53 AM
hi,
2950 switches do not support autoMDIX so you need a crossover.
Regards.
Alain
Don't forget to rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide