Excuse my ignorance but i am a home owner who thought it would be cool to try hdmi over ip, the problem is after buying the equipment i havent a clue how to set it up. So hopefully someone can help?
I have a Cisco SLM2008 switch with an internet connection attached this is working ok but I have then run a cat 5e cable to a second switch SLM2024 which is in my loft(this is were i have all my lan cables returning to.
So if anyone can tell me the set up instructions to join the SLM2008 to the SLM2024 it would be greatly appreciated.
Spent most of the night trying to figure this out so going to bed now hopefully ill wake to some good news.
Currently when changing the Authentication Template under the Onboarding section, there is no choice but to remove SGTs, VNs and IP Pools which clearly disrupt existing services.
Hitless Authentication was introduced in...
Hi, I want to redistribute OMP routes to BGP, i have the doubt if all of the OMP prefixes located in the local vEdge will be redistributed to BGP or just the connected+static networks located in the vEdge. Also how can i restrict some OMP prefix...
Let's say we have two routers configured as RP candidates for auto-RP: R1 - "advertising" its loopback0 interface IP address 22.214.171.124 as the RP for these groups:126.96.36.199/32188.8.131.52/32184.108.40.206/24220.127.116.11/16 R2 - "advertising" its loopback0 int...
hi,i just performed an IOS upgrade and got a report that admin can't create L2 VLANs.i noticed the 'vtp primary force' and 'vtp primary mst' was applied to one of the core switch and perhaps got lost after the upgrade.how to keep the VTP primary persisten...