Connecting small business pro ESW520-24P via wireless bridge
I have installed a new Cisco SFE2000 switch in a remote building and to connect it to an ESW520-24P switch on the LAN I have also installed a Cisco 1242 wireless bridge with the access points configured as root and non-root.
I have connected the root access point into port e8 on the ESW520 swtich and the non-root AP into port e1 on the SFE2000.
My problem is that whilst the ESW520 shows the MAC address of the SFE2000 in the STP port settings screen for port e8 the log file shows a warning that the "SFE2000 switch MAC address is trying to access through port e8 which is locked" and i cannot ping through to the SFE2000.
Do i need to plug the root access point into one of the GE uplink ports? this i guess is the normal way to connect switches but because the SFE2000 is being indirectly connected via the wireless bridge I opted to use one of the ethernet ports instead?
Picture below shows the LAN layout for info' any help much aprpeciated.
Currently when changing the Authentication Template under the Onboarding section, there is no choice but to remove SGTs, VNs and IP Pools which clearly disrupt existing services.
Hitless Authentication was introduced in...
Hi, I want to redistribute OMP routes to BGP, i have the doubt if all of the OMP prefixes located in the local vEdge will be redistributed to BGP or just the connected+static networks located in the vEdge. Also how can i restrict some OMP prefix...
Let's say we have two routers configured as RP candidates for auto-RP: R1 - "advertising" its loopback0 interface IP address 184.108.40.206 as the RP for these groups:220.127.116.11/3218.104.22.168/3222.214.171.124/24126.96.36.199/16 R2 - "advertising" its loopback0 int...
hi,i just performed an IOS upgrade and got a report that admin can't create L2 VLANs.i noticed the 'vtp primary force' and 'vtp primary mst' was applied to one of the core switch and perhaps got lost after the upgrade.how to keep the VTP primary persisten...