11-22-2019 08:56 AM
Link doesn't come up.
Nexus 3548
=========
Ethernet1/1
transceiver is present
type is 10Gbase-LR
name is SXX
part number is SFP-10G-BX
revision is --
serial number is C1909234024
nominal bitrate is 10300 MBit/sec
Link length supported for 9/125um fiber is 10 km
cisco id is 3
cisco extended id number is 4
switch# show interface status | inc 1/1
Eth1/1 -- notconnec 1 auto auto 10Gbase-LR
Catalyst 2960X
============
NAME: "TenGigabitEthernet1/0/2", DESCR: "SFP-10GBase-LR"
PID: SFP-10G-BXD-I , VID: V01 , SN: C1909234025
Te1/0/2 notconnect 1 full 10G SFP-10GBase-LR
11-22-2019 09:11 AM
2960x switches don't support 40Gig using BiDi.
HTH
11-24-2019 11:17 AM
Hey,
can you please post the output of the following commands:
Nexus:
#show int eth 1/1
#show run int eth 1/1
Catalyst:
#show int Te 1/0/2
#show run int Te 1/0/2
Best regards
Julian!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide