10-05-2012 01:42 AM - edited 03-07-2019 09:17 AM
Hi,
We encouter problems flow between two switches at work. The first is a Cisco 3550 and the second is an Alcatel 6400.
For the tests, I connected a PC on each switches on acces port. The 2 switches are connected by a trunk port (the 24th for each switches).
I forgot to tell that the 2 switches are on the same vlan (5).
I made some tests and it takes about 2 minutes to transfer 45mo from one pc to the other one.
I can give a part of the configuration :
Alcatel :
Cisco :
If someone could help me, it would be very nice.
Thank you and sorry for my english
Regards.
10-05-2012 01:50 AM
Hi,
can you try with auto negotiation of speed and duplex mode on the Cisco side ?
Regards.
Alain
Don't forget to rate helpful posts.
10-05-2012 02:18 AM
Thank you for your answer but it didn't help. It still took 124 secs for the transfer.
I tried your solution with an access port between the 2 switches, the transfer was a bit faster (~~ 100 secs) but it's still not enough.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: