cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
314
Views
20
Helpful
14
Replies
Dhikra Marghli
Enthusiast

COPY IMAGE IOSE FROM 9200 L cisco

Hello

 

i have a switch 9200L 48POE + 4 *1Go ..

 

i have  :

tack-switch3-48#dir flash:
Directory of flash:/

56679 -rw- 2131 Jan 25 2021 10:55:08 +00:00 boothelper.log
56690 -rw- 736 Jan 25 2021 10:57:23 +00:00 vlan.dat
56675 drwx 4096 Jan 25 2021 10:54:46 +00:00 .installer
56677 -rw- 185 Jan 25 2021 10:54:48 +00:00 bootloader_evt_handle.log
56678 drwx 4096 Oct 26 2020 12:28:09 +00:00 core
89057 drwx 4096 Oct 26 2020 12:46:54 +00:00 .prst_sync
105249 drwx 4096 Oct 26 2020 12:40:28 +00:00 .rollback_timer
89060 drwx 4096 Oct 26 2020 12:26:48 +00:00 tech_support
89079 drwx 4096 Jan 25 2021 10:55:06 +00:00 dc_profile_dir
56693 -rw- 0 Jan 25 2021 10:56:30 +00:00 dope_hist
56680 -rw- 132108 Jan 25 2021 10:55:20 +00:00 memleak.tcl
56682 drwx 4096 Oct 26 2020 12:31:00 +00:00 .dbpersist
89081 drwx 4096 Oct 26 2020 12:27:45 +00:00 onep
113347 drwx 4096 Jan 25 2021 10:56:26 +00:00 license_evlog
56683 -rw- 862 Jan 25 2021 10:56:30 +00:00 rdope_out.txt
56684 -rw- 89 Jan 25 2021 10:56:27 +00:00 rdope.log
56686 -rw- 2097152 Jan 25 2021 10:58:43 +00:00 nvram_config
56687 -rw- 2097152 Jan 25 2021 10:58:43 +00:00 nvram_config_bkup
56688 -rw- 35 Jan 25 2021 10:56:42 +00:00 pnp-tech-time
56689 -rw- 110640 Jan 25 2021 10:56:47 +00:00 pnp-tech-discovery-summary
113356 -rw- 4883 Oct 26 2020 12:36:24 +00:00 packages.conf
113357 -rw- 391255060 Oct 26 2020 12:35:28 +00:00 cat9k_lite-rpbase.16.12.04.SPA.pkg
113360 -rw- 40633301 Oct 26 2020 12:36:24 +00:00 cat9k_lite-rpboot.16.12.04.SPA.pkg
113358 -rw- 4576276 Oct 26 2020 12:35:29 +00:00 cat9k_lite-srdriver.16.12.04.SPA.pkg
113359 -rw- 10171408 Oct 26 2020 12:35:30 +00:00 cat9k_lite-webui.16.12.04.SPA.pkg
56676 -rw- 2131 Oct 26 2020 12:49:43 +00:00 boothelper.log.old

1956839424 bytes total (1402007552 bytes free)

 

 

so i need how i can copy the image ios for 9200 to tftp !! because i need a backup in my laptop !!c  ??

 

what's the command that allow me have a copy image ios to TFTP !!

 

i wait a reply from expert  switch layer 3 9200 L cisco !!

thanks in advance

 

 

4 ACCEPTED SOLUTIONS

Accepted Solutions
Leo Laohoo
VIP Community Legend

Download the BIN file from the Cisco website.

View solution in original post

balaji.bandi
VIP Expert

Starting with 3650/3850, this includes ASR 1k, ISR1k, ISR4k and all Catalyst 9k, can boot an IOS-XE firmware via BUNDLE Mode (boot using BIN file) or INSTALL Mode (boot using PKG files and packages.conf). 

Install Mode is preferred because the appliance boots a lot faster and uses lower RAM during boot-up times. 

AGAIN, read the Release Notes.  It is all explained, in detail, in the Release Notes.  

View solution in original post


@Dhikra Marghli wrote:

i can downlod this ios from site cisco ... i try and i can ..


The best place to "backup" the software is to download the file from the Cisco website. 

View solution in original post

14 REPLIES 14
Leo Laohoo
VIP Community Legend

Download the BIN file from the Cisco website.

View solution in original post

Means this switch have not a image ios !!! ?? 

 

SO   three  image  are not ios 9200 !!!

please can explain me !! 

 

 cat9k_lite-rpbase.16.12.04.SPA.pkg
113360 -rw- 40633301 Oct 26 2020 12:36:24 +00:00 cat9k_lite-rpboot.16.12.04.SPA.pkg
113358 -rw- 4576276 Oct 26 2020 12:35:29 +00:00 cat9k_lite-srdriver.16.12.04.SPA.pkg
113359 -rw- 10171408 Oct 26 2020 12:35:30 +00:00 cat9k_lite-webui.16.12.04.SPA.pkg

Mean  that this switch don't work except  that i  have to download ios .bin from  site Cisco !!!??

 

Because we have three switch 9200L  are to be stackwise !!! the client's project 

 

please can you explain me about this ios in this switch 9200 !!

thanks in adv

How many years have you been posting in this forum, @Dhikra Marghli?
And of those years, how many times have I asked you to calm down? 

Because I'm going to ask you again.  Calm down.  No need to get your you-know-what into a knot.  

Consider this as my last warning to you.  If you do not act professionally, I will stop helping you.  

I am normal .. I see it normal when asking several questions and I am very calm !!

 

so please can you answer me and thanks again !!


@Dhikra Marghli wrote:

SO three image are not ios 9200 !!!


Yes, they are.  

If you read the Release Notes about Install Mode it will explain, quite in detail, about the "absence" of the BIN file.  

Read the Release Notes, @Dhikra Marghli.  

Thanks to reply me 

 

Just my question ,

 

if I don't install .16.12.04 .BIN  .IN switch 9200L  ...so an impact on the switch and will consider that this switch does not have ios !!!! 

 

Please can you answer me and thanks in adv !!

Starting with 3650/3850, this includes ASR 1k, ISR1k, ISR4k and all Catalyst 9k, can boot an IOS-XE firmware via BUNDLE Mode (boot using BIN file) or INSTALL Mode (boot using PKG files and packages.conf). 

Install Mode is preferred because the appliance boots a lot faster and uses lower RAM during boot-up times. 

AGAIN, read the Release Notes.  It is all explained, in detail, in the Release Notes.  

View solution in original post

balaji.bandi
VIP Expert

@balaji.bandi, he she does not have a valid Service Contract to download the firmware, hence, he she is asking.  

@Leo Laohoo  - I understand and noted your views.  Looks like She (not he i guess)

 



BB


*** Rate All Helpful Responses ***


@balaji.bandi wrote:

Looks like She (not he i guess)


Whoopsie!

i can downlod this ios from site cisco ... i try and i can ..


@Dhikra Marghli wrote:

i can downlod this ios from site cisco ... i try and i can ..


The best place to "backup" the software is to download the file from the Cisco website. 

View solution in original post