cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1274
Views
0
Helpful
1
Replies

CPU Utilization OID for CATOS 4506 Switch

Hussein Rasheed
Beginner
Beginner

Dears,

i  have been trying to collect CPU Utilization via SNMP for Cisco 4506 CatOS Switch, with no luck. I have tried many  OIDs shown below but failed. will you please advise of where i can get  the correct OID?

1.3.6.1.4.1.9.9.109.1.1.1.1.x

1.3.6.1.4.1.9.2.1.x

SW4506B-FIN> (enable) show version
WS-C4506 Software, Version NmpSW: 7.4(1)
Copyright (c) 1995-2002 by Cisco Systems, Inc.
NMP S/W compiled on Sep 20 2002, 11:48:43
GSP S/W compiled on Sep 20 2002, 11:24:50

System Bootstrap Version: 5.4(1)

Hardware Version: 5.0  Model: WS-C4506  Serial #: FOX103805TH

Mod Port Model              Serial #              Versions
--- ---- ------------------ -------------------- ---------------------------------
1   2    WS-X4013           JAE0647043R          Hw : 5.0
                                                 Gsp: 7.4(1.0)
                                                 Nmp: 7.4(1)
2   48   WS-X4148-RJ45V     JAE062905UA          Hw : 3.0
3   48   WS-X4148-RJ45V     JAE07050AP3          Hw : 3.0

       DRAM                    FLASH                   NVRAM
Module Total   Used    Free    Total   Used    Free    Total Used  Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1       65536K  42852K  22684K  16384K   5602K  10782K  480K  355K  125K

Uptime is 297 days, 2 hours, 24 minutes
SW4506B-FIN> (enable)

Rgrds,

1 Reply 1

Nelson Galimba
Cisco Employee
Cisco Employee
You can take a look at the SNMP object navigator:

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.4.1.9.9.109.1.1.1.1


cpmCPUTotalTable (1.3.6.1.4.1.9.9.109.1.1.1)
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: