Hi... Does anyone tried Cross Stack Equal Cost Route? is there any best practice?
Thanks,
Aung
Hi Anug,
The Cisco StackWise interconnect technology is designed with two counter-rotating paths of 16 Gb each. In order to efficiently load balance traffic, packets are allocated between these two logical counter-rotating paths, which creates the 32-Gb interconnection. There are dual paths from any port to any other port within the Catalyst 3750 stack. Therefore, maximum uptime is ensured because there is always an alternate path available if a failure occurs in either path. The Catalyst 3750 supports:
Check out the below link for more details
https://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00806cb982.shtml
Hope to help !!
Ganesh.H
Remember to rate the helpful post