Hi guys.
I have two switches:
WS-C2960XR-48TS-I
WS-C2960XR-24PS-I
I tried to stack these switches. I connected port 1 of SW1 to port 2 of SW2 and port 2 of SW1
then i configured a priority and stack-mac persistent timer 4:
sw1
Switch/Stack Mac Address : 38ed.1848.4400
Mac persistency wait time: 4 mins
H/W Current
Switch# Role Mac Address Priority Version State
----------------------------------------------------------
*1 Master 38ed.1848.4400 1 4 Ready
Stack Port Status Neighbors
Switch# Port 1 Port 2 Port 1 Port 2
--------------------------------------------------------
1 Down Down None None
sw2
Switch#show switch det
Switch/Stack Mac Address : f0b2.e5fd.3380
Mac persistency wait time: 4 mins
H/W Current
Switch# Role Mac Address Priority Version State
----------------------------------------------------------
*2 Master f0b2.e5fd.3380 2 4 Ready
Stack Port Status Neighbors
Switch# Port 1 Port 2 Port 1 Port 2
--------------------------------------------------------
2 Down Down None None
Switch#
Software version is same for both switches:
Cisco IOS Software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.0(2a)EX5, RELEASE SOFTWARE (fc3)
Then i reloaded two switches at the some time but i see the state of both port is DOWN, could you help me?
