cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
463
Views
0
Helpful
2
Replies
MAGNUS SVENSSON
Beginner

CTS (MACsec) and WS-X6716-10GE (With DFC4)

Hi, I am not able to activate MACsec (CTS manual) on the WS-X6716-10GE module. I have a VSS with VS-SUP2T-10G installed. I am able to activate MACsec (CTS manual) on the WS-X6908-10G module.

 

Is MACsec supported on the WS-X6716-10GE (DFC4) ????

 

 

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Jon Marshall
VIP Community Legend

Magnus

The WS-X6716-10G is CTS aware but not CTS capable which means it can understand the tags for forwarding decisions but not add tags.

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/15-1SY/config_guide/sup2T/15_1_sy_swcg_2T/trustsec.html

Jon

View solution in original post

2 REPLIES 2
Jon Marshall
VIP Community Legend

Magnus

The WS-X6716-10G is CTS aware but not CTS capable which means it can understand the tags for forwarding decisions but not add tags.

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/15-1SY/config_guide/sup2T/15_1_sy_swcg_2T/trustsec.html

Jon

View solution in original post

Thanks for your reply.

Best regards

Magnus