default gateway IP update using the gui

[janelle.provine]

What is the step by step process to updating the default gateway ip on a cisco switch using the cisco web interface/gui

[Flavio Miranda]

Hi

 Which switch model ?

[janelle.provine]

@Flavio Miranda 

its a cisco sg350-10p

[Flavio Miranda]

Take a look on this and let me know if thats helps you

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-250-series-smart-switches/smb5110-configure-initial-settings-on-a-switch-using-the-getting-sta.html

Step 12. (Optional) Enter the default gateway IP address in the Administrative Default Gateway field.

[janelle.provine]

@Flavio Miranda 

I think that is only available when you first configure the switch this one is already configure and I am trying to change the default gateway IP

[Flavio Miranda]

Yeah, thats true. I am afraid that you need to run the wizard again in order to change it using the web interface. 

 I recommend you to do it using CLI mode. On the CLI you can use the command

ip default-gateway

[janelle.provine]

The only reason I asked about the gui is because the cli is not available on this switch, I already knew how to do it by cli