cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
611
Views
0
Helpful
2
Replies

DHCP issue in 2960 and unmanageable switch

kri.chi.85
Level 1
Level 1

Dear Team,

I am having 2960 switch and one port is configured with a VLAN and connected with an unmanageable switch and further one more unmanageable switch was connected to the primary unmanageable switch…

The topology will be    2960 switch -> unmanageable Switch -> unmanageable -> PC connected

The issue I am facing most of the PC are getting IP addresses through DHCP server and very few 5 or 6 PC’s out are not getting the IP from DHCP server.

If I switch of the switch and switch on the issue is resolved for those and it will raise for some other PC’s.

Thanks you team......

2 Replies 2

eLiAsAn41
Level 1
Level 1

May I have your Physical Topology? I want to know where the DHCP Server Located? And what brand of the Unmanageable Switch are?

ALIAOF_
Level 6
Level 6

This is the same post as this: https://supportforums.cisco.com/message/3776014#3776014

Before someone can help you, you'll have to provide the requested information so that that people can make suggestions accordingly.  Help us help you

Review Cisco Networking products for a $25 gift card