Hi all,
I am setting up a lab and need some help.
My environment consists of two sites. Site A and B. Each site has vlans 10, 20, 30, 40, 50 and so forth, but each respective vlan on each site has a unique subnet. That is vlan10 on site A has a subnet of 192.168.1.0 and vlan10 at site B has subnet 192.168.2.0. Each LAN is connected to an 1841 router: RA and RC which are subsequently connected via another router RB
I understand setting up dhcp pools on RA and dhcp helper-address on RB and RC, but what I would like to do is set RA to serve dhcp addresses for both sites, but have RA serve both subnets of vlan10 at each respective site. Is this possible to use same vlan names on each sites to serve different subnets or would I need to for example assign unique vlans for both sites. I.e. vlan10 on site A subnet and vlan 20 to subnet found at site B?
Cheers
Az
