01-22-2013 09:53 PM - edited 03-07-2019 11:15 AM
Hi
I configure some commands on the 3750 as follow:
interface Vlan401
description PC_VLAN01
ip address 192.168.150.2 255.255.255.0 secondary
ip address 10.25.125.2 255.255.255.0
standby 1 ip 10.25.125.1
standby 1 priority 150
standby 1 preempt
standby 2 ip 192.168.150.1
standby 2 priority 150
standby 2 preempt
interface Vlan411
description IP-PHONE_VLAN01
ip address 10.25.134.130 255.255.255.128
ip helper-address 10.25.125.4
standby 2 ip 10.25.134.129
standby 2 priority 150
standby 2 preempt
The dhcp server is windows 2002
The NIC ip address is 10.25.125.4 255.255.255.0
Configure three pools on the windows 2002
The frist pool 10.25.125.0/24 The second pool 192.168.150.0/24 The third 10.25.134.128/25
l had binded 10.25.125.0/24 to the special PCs . I hope that the other PCs can get 192.168.150.0/24
But in fact the other PCs get 10.25.134.128/25
why?
01-22-2013 10:12 PM
Hello Hongda,
Please follow the following discussion,
I think their answers expose this on a very good way
Afterwards let me know if you have any question:
https://supportforums.cisco.com/thread/2142481
Regards
01-22-2013 11:08 PM
Hi jcarvaja
first of all, thanks for your reply.
I read the documentation
They that discuss the case are different with my case.
My case are dhcp agent relay(ip helper-address) and ip address secondary
as you mentioned
agent relay to allcate ip address - frist prime subnet(10.25.125.0) ,second prime net (10.0.0.0) ,final other subnet
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: