08-05-2015 08:00 AM - edited 03-08-2019 01:14 AM
We recently purchased a couple WS-C3850-48F-S devices and I just noticed a difference in the output for the sh ver command when compared to the 2960/3560 devices deployed.
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 28 WS-C2960S-24PS-L 15.0(2)SE6 C2960S-UNIVERSALK9-M
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 52 WS-C3560G-48PS 12.2(55)SE9 C3560-IPBASEK9-M
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48P 03.03.05SE cat3k_caa-universalk9 INSTALL
The 2960/3560 give me the full model number while the 3850 does not give me the data I was expecting, specifically the WS-C3850-48F-S model number.
I've spent a bunch of time researching this and haven't found an answer. Any help/explanation you can provide would be greatly appreciated. Thank you.
Solved! Go to Solution.
08-07-2015 02:29 PM
That's all the model is, refer to the following document for further understanding
08-07-2015 02:29 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide