Different Module on Different switch?

[mamuroloke]

Hi need help. if i have CISCO 3750X-12S WITH MODULE GLC-SX MMD on building A and building B WS-C2960-8TC-L WITH UPLINK MODULE 1000BASE-SX can i still connect with out a problem using MMF? suggestion much appreciated, many thanks

[Reza Sharifi · Accepted solution]

Sure, as long as you meet the distance limitation of multimode cable, you are fine.  You need LC to LC connector on both sides.

1000BASE-SX SFP for Multimode Fiber Only

The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 μm multimode fiber links up to 550 m and on 62.5 μm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 μm multimode fiber cable.

http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6577/product_data_sheet0900aecd8033f885.html

HTH

[mamuroloke]

many thanks such a good help for me...