Different root bridge for each vlan on a stack switch

[amitspanchal]

We have the core switches which are connected in the stack and I want each core switch to be the root bridge for each Vlan. Can we do that using the PVST and still the core switch will be in stack?

[MHM Cisco World]

stack meaning one control plane so you can not config each SW in stack to be root for different VLAN.

MHM

[amitspanchal]

My requirement was that the user data traffic should flow through the core switch 1 and the camera traffic should flow through the core switch 2. How can I achieve this?

[Joseph W. Doherty]

Possibly by making the left core the root switch for user VLANs and the right core root for camera VLANs.

[Joseph W. Doherty]

Yes, with PVST, root switches can be different for each VLAN.

Unclear about your usage of "stack".  A stacked switch behaves as a single physical device.