Different Vlan reply

[ciscoreg2]

Hi ALL;

I use magic_pkt tool to wake my computer, I have 2 vlans (172.16.1.0/24&192.168.1.0/24), I found when I use computer in sub 192 cannot wake up computer in subnet 172. Do you know how can I configure?

By the way my computers conneted by EHWIC-4ESG module in my router 1941.

[JDGranger]

Can you post the configs for both of the subnets?

[ciscoreg2]

interface Vlan172

ip address 172.16.1.1 255.255.255.0

ip nat inside

ip virtual-reassembly in

ip tcp adjust-mss 1452

!         

interface Vlan192

ip address 192.168.1.1 255.255.255.0

ip nat inside

ip virtual-reassembly in

ip tcp adjust-mss 1452

[Ganesh Hariharan]

Hi ALL;I use magic_pkt tool to wake my computer, I have 2 vlans (172.16.1.0/24&192.168.1.0/24), I found when I use computer in sub 192 cannot wake up computer in subnet 172. Do you know how can I configure?By the way my computers conneted by EHWIC-4ESG module in my router 1941.

Hello,

Have you allowed the forwarding of UDP 7 packets.

Have a look on the link for WOL configuration in cisco switches

Hope it Helps..

-GI