07-02-2020 11:27 AM
Hi ,
Can any one help me know how to T-Shoot Input discard issue on "N7K-M132XP" module.
07-02-2020 12:20 PM
Hi,
Have a look at this doc:
HTH
07-02-2020 12:42 PM
Hi Reza,
Thanks.I have tried this but these command are dedicated for "F" series cards and these are not working for "M" series cards.
It will be great if you can help me with M series T-shoot document.
07-02-2020 01:33 PM
Hi,
You maybe able to use some of these commands. See page 99-103 regarding "M" series packet counters.
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2016/pdf/BRKDCT-3234.pdf
HTH
07-02-2020 02:44 PM
Hi,
Thanks .That was a nice document .
I have tried to identify egress buffer congestion backing up ingress port.(show hardware queuing drops egress )
But no luck ,as per the interface the discards are continuously increasing.i suspect the card is experiencing over subscription.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: