I am running a hub and spoke type dmvpn network. I have two tunnels both are up. Only one is passing dmvpn packets. Tun1 is in a NHRP state. I know the configuration is correct. Here is a show crypto ipsec sa on hub and spoke router. Any help is appreciated.
Hub:
PERMIT, flags={origin_is_acl,}
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 115, #pkts decrypt: 115, #pkts verify: 115
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 0, #recv errors 0
Spoke:
PERMIT, flags={origin_is_acl,}
#pkts encaps: 144, #pkts encrypt: 144, #pkts digest: 144
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 0, #recv errors 0
