DNCS 5.0 BFSServer will not run - Sessions will not start
We have a DNCS 5.0 system in our lab, and recently all the in-=band traffic to our BFS stopped. I couldn't see anything obviously wrong, and the BFSServer could be restarted from dncsControl without a problem. But, none of our boxes were able to load anything off the BFS and in-band traffic was zero. So, I decided to try and restart the sessions. Now, all the BFS sessions for all BFS sources will not start, right down to the native sources (in band, bootloader, etc). When I try to start a session for any, from the Source Definition, for any BFS Source, it just kicks back to the start session screen.I see this error over and over in the BFSServer log:
12/03/2018 14:08:11.302|14406/1|ERROR|bfsServer:BfsSerSession.C(199)|BfsSerSession::initiateComplete() session: 00:00:00:00:00:00/2 FAILED with rspCode: 18 12/03/2018 14:08:11.303|14406/1|ERROR|libdsmcc:serverStates.C(1585)|WFSSesCnf::handle(ServerCFSCnf):ERROR: Resonse code in ServerCFSCnf message is NOT rspOK for ServerCFSCnf message. For sessionId[00:00:00:00:00:00/2]. Response Code. 12/03/2018 14:08:11.303|14406/1|WARN|bfsServer:BfsNetMgr.C(284)|Unable to make a DsmccMsg because there are not enough bytes. (MessageUnderflow.)
Do you use Cisco DNA Center? Have you used and are you willing to provide your feedback in using the Cisco DNA Center help and documentation?
If so, we’d like you to complete the survey linked below. Your feedback will help provide more effective and easi...
Listen: https://smarturl.it/CCRS9E18Follow us: https://twitter.com/CiscoChampion Reaching the height of your career is no simple feat. It often requires a combination of pursuing the right education, building the right professional network and being ...
In a typical production SD-WAN deployment, we would probably have many remote sites connected via many different Internet connections to a centralized data center or a regional hub. In most regions in the world, Internet providers will always use some typ...