06-27-2011 07:51 PM - edited 03-07-2019 12:59 AM
I just purchased several Cisco 891W routers and I was wondering if they came with console cables (i.e. DB-9 to RJ-45)? Or is this something I have to purchase seperately?
06-27-2011 07:57 PM
For the 860/880/890 and the rest of the ISR G2's, console cables (whether is the traditional or USB) is "optional".
Same goes with 2960S, 3750X and 3560X.
06-27-2011 11:37 PM
Hi,
You can make your own with cat 5 utp.
http://www.alliancedatacom.com/manufacturers/cisco-systems/connector_cables/cable_pinouts.asp
Regards.
Alain.
06-28-2011 03:44 AM
Note that the newer ISR G2 have a 'usb' console (it's essentially a USB -> Serial adapter right in the router) and so you can use any USB -> USB mini cable. The console is recognized as a normal 'usb serial' device (/dev/ttyACM0 on linux).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide