cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

126
Views
0
Helpful
3
Replies
Highlighted
Beginner

does cisco 7206 support PPPoE client mode ?

Hi All,

does cisco 7206 router support PPPoE client mode ? i have got a router and it's running

c7200p-boot-mz.122-33.SRE5.bin but i dont find "pppoe-client" command under the gi0/0 interface.

when i tried to upgrade it with "

c7200-adventerprisek9-mz.151-4.M4.bin" then router thrown an error saying this image is not for this platform.

plz help me how to solve the issue.

Thanks

3 REPLIES 3
Hall of Fame Mentor

does cisco 7206 support PPPoE client mode ?

The command under the gi0/0 interface should be pppoe enable.

Here is a sample config: https://supportforums.cisco.com/docs/DOC-6050

c7200-adventerprisek9-mz.151-4.M4.bin

That image is for 7200 with NPEs other than NPE-G2. Your prior image had

c7200p-boot-mz.122-33.SRE5.bin thus your upgrade image would read:

c7200p-adventerprisek9-mz.151-4.M4.bin

Beginner

does cisco 7206 support PPPoE client mode ?

Hi Edison,

the doc u shared - in the client router, under the interface, there is command "

pppoe-client dial-pool-number 1". this command is not there in 7200. i think this command is requried for the router to act as a PPPoE client.

---------------------

interface GigabitEthernet0/1

ip address 10.1.1.2 255.255.255.0

! Configured for inside network

duplex auto

speed auto

pppoe enable group global          

  ! PPPoE configured for this interface

pppoe-client dial-pool-number 1 dial-on-demand

! This interface will be used as a PPPoE client medium using dialer 1 interface

!-------------------------

let me try that image.

Thanks

Beginner

Re: does cisco 7206 support PPPoE client mode ?

Hi,

router giving the command "pppoe-client" after upgrading to the latest image (c7200p-adventerprisek9-mz.151-4.M4.bin).

thanks Edison

Thanks

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards