Does my switch have 10gig SFP or not?

[scsc_tech]

I have a ws-c3650-48ps-L 

the front panel shows 48 POE+ 2X10G with ports TE3 and TE4 labeled as well.

However the datasheet, and in the config, however, they are listed as gigabitethernet 1/1/3 and 1/1/4

Does this switch actually have two 10g interfaces? If so how do I configure them for 10gig

[Reza Sharifi]

That switch has only 4 1Gig ports and no 10Gig.

WS-C3650-48PS-L

from the data sheet:

Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x1G Uplink ports, with 640WAC power supply, 1 RU, LAN Base feature set

link

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3650-series-switches/data_sheet-c78-729449.html

HTH

[AndreaTornaghi]

Dear, 3650-48PS has only Gigabit port. Probably the chassis is the same for all 3650 model.

WS-C3650-48PS-L

Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x1G Uplink ports, with 640WAC power supply, 1 RU, LAN Base feature set

In case that you need 10Gb SFP+ you should buy a 3650-48PD-L

WS-C3650-48PD-L

Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with 640WAC power supply, 1 RU, LAN Base feature set

[scsc_tech]

Yea, i read the datasheet based on the model number, seems really strange that the front bezel is mislabeled.

[AndreaTornaghi]

Dear, 3650-48PS has only Gigabit port. Probably the chassis is the same for all 3650 model.

WS-C3650-48PS-L - Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x1G Uplink ports, with 640WAC power supply, 1 RU, LAN Base feature set

In case that you need 10Gb SFP+ you should buy a 3650-48PD-L

 WS-C3650-48PD-L - Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with 640WAC power supply, 1 RU, LAN Base feature set

[balaji.bandi]

Can you post show inventory to check what kind of SFP you have installed in the modules.

as per specification 4 X SFP.

[Leo Laohoo]

Switch will only support SFP.