03-30-2016 04:30 AM - edited 03-08-2019 05:09 AM
Does "object-group network" statement supported in WS-C3850-48T?
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48T 03.06.04.E cat3k_caa-universalk9 INSTALL
2 56 WS-C3850-48T 03.06.04.E cat3k_caa-universalk9 INSTALL
03-30-2016 08:39 AM
Hi,
I have checked my switches same IOS/XE as you - object-group is an unknown command.
Also unknown when searching in the 3.6 Config guide
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3e/consolidated_guide/configuration_guide/b_consolidated_3850_3e_cg.html
Regards
Alex
03-30-2016 10:58 PM
Hi acampbell, thanks for your answer.
Maybe you know, is there a plan to include this statement in a new (future) versions of IOS/XE?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: