cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
979
Views
0
Helpful
3
Replies

Does the cisco WS-C2960X-48FPD-L switch support UPOE?

martin.figaro
Level 1
Level 1

A supplier is offering a CISCO WS-C2960X-48FPD-L switches.  Does this model support UPOE technology?

1 Accepted Solution

Accepted Solutions

Hi Martin,

No,WS-C2960X-48FPD-L is POE+ (IEEE 802.3at)switch.

maximum available power on a port is 30w .Have a look at the link provided on the previous reply and notice that you wouldn't have enough power on the PSU to power up all 48 ports as well

Cheers

Prabath  

***Please rate all the useful posts***
-Prabath

View solution in original post

3 Replies 3

agapitca19
Level 1
Level 1

It doesn't support UPOE based on the link below. Also, when you go the URL, click Compare Catalyst 2960-X and Catalyst 3650 and you'll see a pdf that shows which switch supports UPOE.

http://www.cisco.com/c/en/us/products/switches/catalyst-2960-x-series-switches/models-comparison.html

HTH.

Please rate and mark the comment if you found it helpful.

Hi Martin,

No,WS-C2960X-48FPD-L is POE+ (IEEE 802.3at)switch.

maximum available power on a port is 30w .Have a look at the link provided on the previous reply and notice that you wouldn't have enough power on the PSU to power up all 48 ports as well

Cheers

Prabath  

***Please rate all the useful posts***
-Prabath

martin.figaro
Level 1
Level 1

Thks,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco