Doubt about RIP

[ciscolover]

Hi all. I need to activate rip to send some networks in a router...

This router send the networks to some routers but, one of this, not need receive all the routes only certalinly routes...

Its possible to control wich routes send rip to this router. Maybe using ACL?

Thanks ¡'¡¡¡

[lgijssel · Accepted solution]

This can be achieved by using a distribute list:

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080208748.shtml

This is configured on a per-interface basis so the router you want to send a limited update has to be the only one on the outbound interface.

regards,

Leo

[ciscolover]

Perfect ¡¡¡