01-11-2013 12:28 AM - edited 03-07-2019 11:02 AM
Hello
I would just like to confirm whether dual stack hsrp is possible or not on 3750X both stack and non-stack.
The following is that I have to take care of this on the stack?
[Catalyst 3750 Software Configuration Guide, Release 12.2(55)SE]
%FHRP group not consistent with already configured groups on the switch stack
Best Regars,
01-11-2013 12:43 AM
Check out this, it might help you.
01-11-2013 12:45 AM
Can you share some configuration?
Sent from Cisco Technical Support iPad App
01-12-2013 02:12 PM
"HSRP for IPv4 and HSRP for IPv6 are mutually exclusive. You cannot enable both at the same time. "
This is from the 3750 guide you linked.
01-14-2013 03:18 PM
the configuration is this and IOS version is 12.2(55)SE1
interface Vlan10
ip address 10.1.1.1 255.255.255.0
ipv6 address FE80::1 link-local
ipv6 address 2001::1/64
standby version 2
standby 0 ip 10.1.1.254
standby 0 priority 101
standby 0 preempt
standby 1 ipv6 FE80::254
standby 1 priority 101
standby 1 preempt
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide