- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-07-2012 09:30 PM - edited 03-07-2019 04:47 AM
We have Cisco Cat4503 series L3 Switch and Cisco L2 2560 Series Switches, some of the users want to have a dynamic VLAN membership, and connecting with the network as mobile users,
Kindly let me know can it poosible and create dynamic VLAN for specific group of users.....
Solved! Go to Solution.
- Labels:
-
LAN Switching
Accepted Solutions

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-08-2012 10:58 PM
Have a look at this, it may work on 4500
http://www.firewall.cx/networking-topics/vlan-networks/designing-vlans/217-dynamic-vlans.html
http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/7.5/configuration/guide/vmps.html
Enjoy the reading
Eugen

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-08-2012 12:08 AM
Have a read/look at this..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml
Eugen
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-08-2012 10:11 PM
Yes it is ok, but the actual requirement is something defferent, by through common VLAN to mention switch, is it possible that some users will connect thier laptop/notepad to any of the ports in the Campus network and get same VLAN and IP without Radius/Tacas+ technology!!!!!!

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-08-2012 10:58 PM
Have a look at this, it may work on 4500
http://www.firewall.cx/networking-topics/vlan-networks/designing-vlans/217-dynamic-vlans.html
http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/7.5/configuration/guide/vmps.html
Enjoy the reading
Eugen
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-08-2012 11:40 PM
Can We use Cisco ACS Server without taking licence from Cisco for Radius/Takas+!!!!

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-09-2012 04:04 AM
You can use a free Radius server installed on a computer.
or a Tacacs+ for that matter,
Eugen
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-22-2012 12:50 AM
Thnaks for your support...
