I am trying to configure a 4331 with Call Manager Express and Cisco Unity Connection. We have an e series 140S balde server installed in the router. Initial config needs:-
◦ enable
◦ configure terminal
◦ interface ucse slot/port
◦ imc ip address cimc-ip-address subnet mask default-gateway cimc-gateway-ip-address
◦ imc access-port shared-lom console
◦ no shut
◦ end:
However, when I type the "imc" command is entered I get "invalid input" as if the imc command is not recognised by the IOS.
8126-CME(config)#int ucse1/0/0
8126-CME(config-if)#imc ip 10.0.0.2 255.255.255.0 default-gateway 10.0.0.1
^
% Invalid input detected at '^' marker.
8126-CME(config-if)#imc
^
% Invalid input detected at '^' marker.
8126-CME(config-if)#end
8126-CME#
8126-CME#sh ver
Cisco IOS XE Software, Version 03.16.00c.S - Extended Support Release
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S0c, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Sat 15-Aug-15 23:32 by mcpre
IOS running on 4331 is
Can anybody tell me whether This IOS supports e-series and imc config command?
Thanks for your help
