12-24-2012 04:49 AM - edited 03-07-2019 10:45 AM
hi,
We have DMVPN tunnels configure and eigrp running on DMVPN.
From last one week i have seeing logs message that eigrp is flapping on dmvpn neighbors.Link between the 2 sites is stable
Kindly advise show ver is attached from the switch
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(15)T7, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Wed 13-Aug-08 17:09 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
AJM-RTR-2811 uptime is 18 weeks, 3 days, 23 hours, 51 minutes
System returned to ROM by power-on
System restarted at 16:09:13 UTC Thu Aug 16 2012
System image file is "flash:c2800nm-advipservicesk9-mz.124-15.T7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
Processor board ID FHK1043F2BG
2 FastEthernet interfaces
4 ISDN Basic Rate interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
12-24-2012 04:57 AM
Is the tunnel going up/down? How you running this with Ipsec over the internet? If so are you experiencing problems with your internet connection? Is there any good information in the logs, or any recent config changes?
Sent from Cisco Technical Support Android App
12-24-2012 05:01 AM
thanks for your reply.
Nope its lease line and the link is stable below is DMVPN tunnel config
interface Tunnel1
description ++++ Primary DMVPN Cloud ++++
bandwidth 2048
ip address 172.16.18.30 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1500
ip hello-interval eigrp 100 10
ip hold-time eigrp 100 30
no ip next-hop-self eigrp 100
ip authentication mode eigrp 100 md5
ip authentication key-chain eigrp 100 EIGRP
ip nhrp authentication PMaouA63
ip nhrp map 172.16.18.1 172.16.16.6
ip nhrp map multicast 172.16.16.6
ip nhrp map 172.16.18.2 172.16.16.2
ip nhrp map multicast 172.16.16.2
ip nhrp network-id 101
ip nhrp holdtime 60
ip nhrp nhs 172.16.18.1
ip nhrp nhs 172.16.18.2
ip tcp adjust-mss 1360
no ip split-horizon eigrp 100
tunnel source FastEthernet0/0
tunnel mode gre multipoint
tunnel key 1001
tunnel protection ipsec profile DMVPNPROFILE shared
12-24-2012 05:05 AM
just to add on above the tunnel is stable.its only eigrp which is flaping
12-24-2012 05:58 AM
I'll assume EIGRP is running AS 100.
If you debug eigrp does that provide any useful information?
--
CCNP, CCIP, CCDP, CCNA: Security/Wireless
Blog: http://ccie-or-null.net/
12-25-2012 12:06 AM
Any body find the same issue and found any bug in the IOS related to the issue.
Thanks
12-26-2012 04:00 AM
Please ask your ISP if they facing any L2 connectivity issue in cloud, since this is Lease-Line connection but still there could be some connectivity issue at ISP edge if both remote sides A&B are stable. flapping of EIGRP has many reason, it could be connectivity issue, SIA etc.
Did you see any abnormal logs on device or in Syslog if so?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide