I have an EIGRP issue hopefully someone can help me with. I have a 2821 router with three static routes to VLANs that exist on a switch it's connected to. I want to share these routes with the rest of my network. I thought a "redistribute static" command would do this, but it does not.
I can run a "show ip eigrp topology <network> <network mask>" on the router and other equipment in the eigrp network and the network information comes up, but I can't ping any of the VLANs from anything but the router. My EIGRP statement also includes "no auto-summary" but that does not help either. Below is the results of the "show ip eigrp topology" command.
router#sh ip eigrp XXX top 10.X.47.0 255.255.255.0
IP-EIGRP (AS XXX): Topology entry for 10.X.47.0/24
State is Passive, Query origin flag is 1, 1 Successor(s), FD is 28160
Routing Descriptor Blocks:
10.X.0.15, from Rstatic, Send flag is 0x0
Composite metric is (28160/0), Route is External
Vector metric:
Minimum bandwidth is 100000 Kbit
Total delay is 100 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 0
External data:
Originating router is 10.X.X.3 (this system)
AS number of route is 0
External protocol is Static, external metric is 0
Administrator tag is 0 (0x00000000)
