01-23-2024 11:07 AM
Hi Everyone,
I would greatly appreciate your help, I’m trying to enable IPV6 in global configuration and a VLAN but I wasn't able to configure, I have checked some references like this:
switch(config)# ipv6 unicast-routing
switch(config)#interface vlan 3
switch(config-if)# ipv6 enable
but these options aren’t available In the nexus Nexus 9336C-FX2 (version 9.3(9) Bios:version 05.45 )
Global Configuration:
nexus(config)# ipv6 ?
access-list Configure access list
adjacency Configure Adjmgr
adjacency-stale-timer When probing for an adjacency begins
dhcp Configure IPv6 DHCP
host Add an entry to the ip hostname table
icmp Configure icmp parameters
internal Commands for internal use
mld MLD global configuration commands
multicast Configure IP multicast global parameters
nd ICMPv6 Neighbor Discovery commands
nd Configure IPv6 ND
neighbor Configure IPv6 address to layer-2 address mapping
neighbor Configure ipv6 snooping Binding Table
prefix-list Build a prefix list
queue-packets Queue 1 packet when triggered NS is sent
route Configure IPv6 unicast static route
routing Configure routing information
routing Routing information
snooping IPv6 snooping configuration commands
switch-packets Switch ND packets received on core ports
VLAN Configuration:
nexus(config)# int vlan 2142
nexus(config-if)# ipv6 ?
address Configure IPv6 address on interface
forward Enable ipv6 forwarding on interface
icmp ICMPv6 commands
link-local Change format of link-local address
mld MLD interface configuration commands
nd ICMPv6 Neighbor Discovery commands
neighbor Configure IPv6 address to layer-2 address mapping
redirects Enable sending ICMPv6 Redirect messages
traffic-filter Specify access control for packets
unreachables Enable sending ICMPv6 Unreachable messages (port-unreachables are always rate-limit enabled)
verify Unicast Reverse Path Forwarding
Thanks,
01-23-2024 01:10 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide