I have 6509 with WS-SVC-NAM-2 module. But I have difficulties to activate NBAR monitoring. My NAM Traffic Analyzer said that my software version incompatible. I have already check with Software Advisor tools, and my IOS have NBAR feature.
Here are my hardware info
IOS : s72033-adventerprisek9_wan-mz.122-18.SXF7.bin
Modules :
SFSwitch#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 6 Firewall Module WS-SVC-FWM-1 SADXXXXXXXX
2 8 Intrusion Detection System WS-SVC-IDSM-2 SADXXXXXXXX
3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SADXXXXXXXX
4 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SADXXXXXXXX
5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SADXXXXXXXX
7 8 Network Analysis Module WS-SVC-NAM-2 SADXXXXXXXX
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0019.2fa7.9a50 to 0019.2fa7.9a57 4.0 7.2(1) 3.1(3) Ok
2 0019.5670.df58 to 0019.5670.df5f 6.2 7.2(1) 5.0(2) Ok
3 0019.56c3.3220 to 0019.56c3.324f 2.5 12.2(14r)S5 12.2(18)SXF7 Ok
4 0019.55c5.18c0 to 0019.55c5.18ef 2.5 12.2(14r)S5 12.2(18)SXF7 Ok
5 0016.9df6.a138 to 0016.9df6.a13b 5.2 8.4(2) 12.2(18)SXF7 Ok
7 0019.561c.8082 to 0019.561c.8089 4.2 7.2(1) 3.5(1a) Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
2 IDS 2 accelerator board WS-SVC-IDSUPG SADXXXXXXXX 2.5 Ok
3 Centralized Forwarding Card WS-F6700-CFC SADXXXXXXXX 3.0 Ok
4 Centralized Forwarding Card WS-F6700-CFC SADXXXXXXXX 3.0 Ok
5 Policy Feature Card 3 WS-F6K-PFC3B SADXXXXXXXX 2.3 Ok
5 MSFC3 Daughterboard WS-SUP720 SADXXXXXXXX 2.5 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
3 Pass
4 Pass
5 Pass
7 Pass
Please help me how to activate this feature.
Thanks
Iwan
