Hello Every Body,
I want to know if it is possible to load balance between 2 routes, wich have 2 different ISP interface.
In attachement you have the scenario.
I have my primary router with an ISP of 4 MB
and a second router with an ISP of 2 MB
Is it possible to set the both router to load balance traffic ?
It is more like load sharing:
have a look at this link:
yes but only for outgoing traffic with static routes for example. But don't forget this is load-sharing and that it will be performed per-flow( src-dst IP pair).
Don't forget to rate helpful posts.
Hello i just want to know what can be the best practice for this goal !.
Mean if i set the 2 routers with GLBP, is it that it will load balance the 2 different ISP?
So if i use for example BGP, i don´t know also, if i´ll enhance or get a kind of load balancing between the 2 routers.
What can be the best recommandation, for this kind of scenario ?
If you want to achieve inbound and outbound load balancing you'll need to go with either BGP or a load balancer.
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
OER/PfR, if supported by your router platforms, might be ideal for outbound load sharing.