EOL and EOS for IOS 12.2(58)SE

[shogo.takeuchi]

Dear folks,

Please help me in finding the EOS and EOL for 12.2(58)SE on C2960S.
I fonud the EOS and EOL for 12.2(55)SE as below, but it does not mention 12.2(58)SE.

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3750-series-switches/eos-eol-notice-c51-731425.html

Regards,

[glen.grant]

  It probably has not been announce yet , it's not that old .

[shogo.takeuchi]

Hi,

Thank you for your answer.

[Leo Laohoo]

Why you would want to use 12.2(58)SE for a 2960S is beyond me.  Because I know, based on my (very bad )experience, I would avoid 12.2(58)SE at all cost.  

For 2960S, go with 15.0(2)SE4.  Don't be tempted to use 15.0(2)SE5.

[Jose Solano · Accepted solution]

Hi,

So far no EOL/EOS has been published fo the 12.2.58SE IOS release.

[shogo.takeuchi]

Hi,

Thank you for your answer.

[Leo Laohoo]

It is sad because 12.2(55)SE is, by far, the most stable IOS I've ever encountered and used.  I would, without a moment of hesitation, recommend this IOS version over the Cisco recommended 15.0(2)SE for the Cat 3K.