EPoE from CGS-2520-16S-8PC switch to power 1252 dual radio AP?
I got this right off the hardware installation guide for the 2520. Page 1-4
The 10/100 PoE ports on the Cisco CGS-2520-16S-8PC switches provide PoE support for devices that are compliant with IEEE 802.3af. The Cisco prestandard PoE is also supported for Cisco IP Phones and Cisco Aironet Access Points. The PoE ports on the switch deliver up to 15.4 W of PoE. Any four of the eight ports are designated as high priority PoE ports, while other four ports are designated as low priority PoE ports. When both the power-supply modules are installed, the system has enough power to support all the eight ports as PoE ports. In case one of the power-supply module fails, the power to the low priority PoE ports is dropped, while power to the high priority PoE ports remains uninterrupted.
Hi!Need to find network devices but not want to open SSH and do show cdp nei, show lldp nei and then need to sh cdp nei gig0/1 det and more.... ?Now You can do from PowerShell.\cdplldp.exe -v v3 -u <SNMPv3 user> -a SHA -w <SNMPv3 authkey> -pp ...
Community Live slides- Getting to know Cisco SD-WAN
(Live event - formerly known as Webcast- Wednesday December 11, 2019 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Wednesday 11th, December 2019 at 10hrs PDT
To participate in this event, please use the button to ask your questions
This topic is a chance to clarify your questions about the Cisco Software-Defined WAN (SD-WAN) solution, its historical roo...
Starting from NFVIS 3.12 versions, the deploy option does not depict all the SR-IOV VFs(Virtual Functions) available in a physical interface. This change is introduced as (i) the number of VFs of ENCS platform on LANs side is increased to 24 and (ii) the...