Error doing ping between PC and the server

[etroncho555]

Hello every one,

Im new with Packet Tracer and I cant send a ping from one PC to the server. Between the PCs its ok, but outside the router it does not work.

Thanks

 

[Bryson F]

hello @etroncho555,

we will need a few details to begin helping you out with this issue.

1. is it just one pc that cannot ping the server?

2. can each pc ping your router?

3. if 2 is yes, then can your router ping the server? 

lets start with the configuration of " Switch0" and "Router-PT-Emp". if you could post a generic show run of those devices we can start there

[etroncho555]

Hello Bryson F,

I have upload the file, there are no problems with PCs, the proble is just to send a ping between Pc and server or vice, I think there is a proble in the router but I not sure.

Thanks

[Bryson F]

My PT isnt letting me upload the file for some reason so i am a little blind in this for right now i am sorry about that. but i would go through and double check your IPs and make sure the gateways are compatable. other than that with out a copy and paste of the router config its up to you and @Martin L ill look into my PT problem though

[Martin L]

you will need to attach your PT lab file here in a zip format only; Save , zip it and attach it.

Regards, ML
**Please Rate All Helpful Responses **

[etroncho555]

Hello Martin L,

I have upload the file, there are no problems with PCs, the proble is just to send a ping between Pc and server or vice, I think there is a proble in the router but I not sure.

Thanks

[David Ruess]

Hello,

Not sure why you have the Cloud or modem in between the server in the router as I didn't se any config on either of them. I just connected the server with a crossover cable directly to the router and the PCs were able to ping the server.

-David

[NetworkDave · Accepted solution]

@etroncho555,

Pings Fail from PC's to Server0
Successful pings from PC's to their respective gateways (Router0, F1/0-F5/0).
Router0 - F0/0 - 2.200.158.134/30 <---> Server0 - 2.200.158.133/30
Link is up/up from Router0-F0/0 to Server0
Ping Fail from Router0-F0/0 to Server0
Simulation indicates problem is in the cloud/internet
*****
Internet Cloud > Config > (Connections) DSL >
In the drop box on the left, select Modem5
In the drop box on the right, select FastEthernet0
Click Add
Under Port - From Post should show Modem5 - To Post should show FastEthernet0.
*****
Pings from PC's to server are successful. Also, able to connect to server webpage using its IP address.

HTH

----------------------------------------------------------------------------------------------------
Remember to mark helpful posts and mark the correct answer as a solution; It helps other users with similar questions.

[etroncho555]

Hello NetworkDave,

Done, It works.

Thanks