10-14-2022 08:31 AM
Hi to all, we want to enable nxapi on NX3548, but when i try to enable it i get the following:
NEXUSA(config)# feature nxapi
Error: Feature not supported on this platform
It is very strange since the 3548 should support the API according to this doc:
What could be the problem?
10-15-2022 07:55 AM
- What nx-os version are you running ? Also what do you get for show nxapi
M.
10-17-2022 12:36 AM
Hi,
this is the version:
Software
BIOS: version 1.9.0
loader: version N/A
kickstart: version 6.0(2)A4(5)
system: version 6.0(2)A4(5)
The version should be ok since the guide i posted is related to 6.x Version.
show nxapi
nxapi not enabled
When i tried to enable it i get the error
10-17-2022 02:12 AM
>....The version should be ok since the guide i posted is related to 6.x Version.
Theoretically yes , but I still would upgrade to https://software.cisco.com/download/home/284365099/type/282088129/release/9.3(10) and try again, the reason being that I could not find any references to nx-api in the 6.x release notes while it is mentioned in 9.x , it is always advisable anyway to verify such a problem against the latest advisory release for the particular platform.
M.
10-15-2022 11:40 AM
Hello,
I think you need something like version 9.2 (see the link below)...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: